The following outline shows the basic procedures for getting a Unit ready, registering a Unit and making settings and using the Unit.
Get the devices ready for set-up Please follow all directions for getting ready found in the Introductory Manual or User's Manual that came with the Unit.
Open the RTR-500W Settings Utilityto make all the necessary registrations and settings.
If wireless communication between the Base Unit and Remote Units is poor or you wish to extend the transmission range, register the necessary number of Repeaters.
Place the Base Unit, Remote Units and, if necessary, Repeaters in their actual positions. After placing them where they will be used, open the RTR-500W Settings Utilityand carry out signal strength tests.
Using the settings made in the RTR-500W Settings Utility the RTR-500NW/500AW will carry out the Auto-Sending of Recorded Data, Monitoring for Warnings and the Gathering of Current Readings.
View the downloaded data in graph form using the Temperature / Humidity Graph program or the Multi-scale Graph program.
If necessary to make adjustments to measurement readings, use the Adjustment Tools application.
If you wish to download recorded data via methods other than wireless communication, it is possible to directly download from a Remote Unit to a PC using the Data Downloading Tools.